Brewdets Hydraulic Accessories Fitting Reducer FZ-1630

Hydraulic Part & Accesories House 700 Bar Brewdets Hydraulic Part & Accesories House Product Description Four layer design, including two high strength steel wire braids. Outside jacket is polyurethane to provide maxium abrasion resistance. Low volumetric expansion under pressure to enhance overall system efficiency. Crimped-on rubber strain relief for improved life and durability on all… selengkapnya

Lihat Detail

Brewdets Hydraulic Quick Coupler 3/8 NPT Male & Female Completed Set 700 BAR CQC38 Brewdets Hydraulic Quick Coupler The CQC38 is a high-pressure hydraulic quick coupler consisting of a set of male and female couplings with 3/8″ NPT threaded connections. Designed for hydraulic systems operating up to 700 BAR (10,000 PSI), this coupler facilitates the… selengkapnya

Lihat Detail

Hydraulic Part Accesories Manifold Brewdets Hydraulic Part Accessories – KSA4 Manifold Product Description: Hydraulic Part Accesories Manifold | The KSA‑4 manifold is a hydraulic device designed to distribute oil from a single pressure source (such as a pump) to multiple lines or cylinders. It enables simultaneous operation of several hydraulic tools or actuators, enhancing efficiency… selengkapnya

Lihat Detail

Brewdets Hydraulic Part Accesories Gauge Adapter Product Description Gauge adaptor can be connected with pressure gauge conveniently, used for the connection of hydraulic tool and pressure gauge, Male coupler thread is connected with cylinder, pump station and other hydraulic tools; female coupler thread is connected with hose and quick coupling. The third thread is used… selengkapnya

Lihat Detail

Brewdets Hydraulic Hose 700 Bar Length 3m HX-6-2SP-3 700 bar hydraulic hose is a high-pressure hose designed for hydraulic systems that operate at up to 700 bar (10,000 psi). These are typically used in demanding industrial or mobile equipment applications, including high-pressure hydraulic tools, jacks, cylinders, and pumps. Key Features of 700 Bar Hydraulic Hoses:… selengkapnya

Lihat Detail

Brewdets Pressure Gauge KN-100-250 Brewdets Pressure Gauge This 4 inch diameter Pressure Gauge is designed for high pressure measurements up to 2500 BAR, ideal for heavy industrial applications such as hydraulics, drilling, and other high pressure systems. With a 1/2″ NPT (Male) threaded connection, this tool is compatible with a variety of standard pipe systems… selengkapnya

Lihat Detail

Brewdets Pressure Gauge KN-100-70 Brewdets Pressure Gauge This Pressure Gauge is designed for high pressure measurements up to 700 BAR (10,000 PSI). With a 4-inch (100 mm) dial and a standard 1/2″ NPT male connection, this tool is suitable for industrial applications such as hydraulic systems, pressure testing, and high-pressure power units. Technical Specifications: Dial… selengkapnya

Lihat Detail

Brewdets Hydraulic Part Accesories Manifold KSA2 Oil manifold is used for synchronous lifting of hydraulic pump station and multiple hydraulic cylinders. In the case of 1 set of hydraulic pump driving multiple hydraulic cylinders and other hydraulic tools, the corresponding manifold is needed. Oil port thread of manifold is standard NPT3/8”.   Kunjungi Laman Berikut… selengkapnya

Lihat Detail

Brewdets Karet Elastomer Jembatan – Bearing Pad Product Description: Bridge Elastomer Bearing Pad Karet Elastomer Jembatan | The Bridge Elastomer Bearing Pad, also known as a Bridge Bearing Pad, is an essential structural component designed to transfer loads from the bridge girder to the substructure (abutment or pier) while accommodating movements caused by traffic loads,… selengkapnya

Lihat Detail

Brewdets Hydraulic Control Manual Check Valve V-66 Brewdets Hydraulic Accesories Product Description The V-66 Manually Operated Check Valves are designed for load holding applications involving single and double-acting cylinders. With a built-in relief valve set at 11,500 psi (790 Bar), they enable quick directional changes of fluid by the operator. Featuring Viton seals and a… selengkapnya

Lihat Detail